| Customization: | Available |
|---|---|
| Type: | Cone Crusher |
| Motor Type: | AC Motor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Working principle
The vertical rolling mill has two pairs of grinding rollers. Each pair of the roller is composed of two narrow rollers mounted on the same axis and can rotate at different speeds. The motor driving reducer makes the grinding plate rotate. The raw material is sent to the center of the rotating grinding plate by the locking air feeding equipment. Under the action of centrifugal force, the material moves to the surrounding area of the grinding plate and enters the grinding roller slide. Under the action of roller pressure, the material is crushed by extrusion, grinding, and shearing. At the same time, the ground material is flowed by hot air upward from the wind ring. The coarse granularity will be back to the mill to regrind and suspended material will be dried. Fine powder following hot air is taken to the classifier system. Qualified powder enters the powder collector with airflow as finished products. Unqualified powder falls to be regrinded with new feeding material together. This cycle is continuous to complete the whole grinding process.
| ZLM-K Series Vertical Mill (Slag Mill) | ||||||
| Model | ZLM130K | ZLM150K | ZLM170K | ZLM190K | ZLM220K | |
| Roller Qty. (pcs) | 2 | 2 | 2 | 2 | 2 | |
| Ring Dia. (mm) | 1100 | 1300 | 1400 | 1500 | 1700 | |
| Disc Dia. (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | |
| Main unit speed (r/min) | 43 | 39.5 | 36.5 | 33.5 | 31.5 | |
| Capacity (t/h) | 10~30 | 13~40 | 18~57 | 23~72 | 36~110 | |
| Final size | μm | 170~45 | 170~45 | 170~45 | 170~45 | 170~45 |
| Mesh | 80~325 | 80~325 | 80~325 | 80~325 | 80~325 | |
| Product moisture | ≤1% | ≤1% | ≤1% | ≤1% | ≤1% | |
| Input Particle Size D80 (mm) | <10 | <10 | <10 | <10 | <10 | |
| Max.input size (mm) | <38 | <40 | <42 | <45 | <50 | |
| Best input moisture | <4% | <4% | <4% | <4% | <4% | |
| Input moisture (drying required) | 4~15% | 4~15% | 4~15% | 4~15% | 4~15% | |
| Inlet air temperature (ºC) | <350 | <350 | <350 | <350 | <350 | |
| Outlet air temperature (ºC) | 70~95 | 70~95 | 70~95 | 70~95 | 70~95 | |
| Main Mill Power (KW) | 200 | 280 | 400 | 500 | 800 | |
| Analytical Machine (frequency modulation motor) (KW) | 30 | 37 | 55 | 75 | 110 | |
| Fan motor power(KW) | 250 | 315 | 450 | 560 | 710 | |
| Overall dimension | Length(mm) | 5520 | 6550 | 7170 | 7580 | 8080 |
| Width(mm) | 2500 | 3070 | 3460 | 3820 | 6700 | |
| Height(mm) | 7060 | 7560 | 8300 | 8960 | 9020 | |
| ZLM-M Series Vertical Mill (Coal Mill) | ||||||
| Model | ZLM130M | ZLM150M | ZLM170M | ZLM190M | ZLM220M | |
| Roller Qty. (pcs) | 2 | 2 | 2 | 2 | 2 | |
| Roller Dia. (mm) | 1100 | 1300 | 1400 | 1500 | 1700 | |
| Disc Dia. (mm) | 1300 | 1500 | 1700 | 1900 | 2200 | |
| Main unit speed (r/min) | 49 | 43 | 38.6 | 34.8 | 32.6 | |
| Capacity (t/h) | 10~15 | 16-22 | 20-28 | 26-35 | 35-50 | |
| Coal powder fineness (R0.08) | 5-20% | 5-20% | 5-20% | 5-20% | 5-20% | |
| Coal powder moisture | <1% | <1% | <1% | <1% | <1% | |
| Input Particle Size D80 (mm) | <10 | <10 | <10 | <10 | <10 | |
| Max.input size (mm) | <38 | <40 | <42 | <45 | <50 | |
| Input moisture | <15% | <15% | <15% | <15% | <15% | |
| Inlet air temperature (ºC) | <350 | <350 | <350 | <350 | <350 | |
| Outlet air temperature (ºC) | 75~95 | 75~95 | 75~95 | 75~95 | 75~95 | |
| Haugh's grindable index of raw coal | >55 | >55 | >55 | >55 | >55 | |
| Main mill power (KW) | 185 | 250 | 315 | 400 | 500 | |
| Analytical Machine (frequency modulation motor) (KW) | 30 | 37 | 55 | 75 | 110 | |
| Fan motor power (KW) | 250 | 315 | 450 | 560 | 710 | |
| Overall Dimension | Length(mm) | 5520 | 6550 | 7170 | 7580 | 8080 |
| Width(mm) | 2500 | 3070 | 3460 | 3820 | 4660 | |
| Height(mm) | 7060 | 7560 | 8300 | 8960 | 9020 | |
IMAQ Group, founded in 2021 with a registered capital of 30 million yuan, is headquartered in Xuzhou, Jiangsu Province., is headquartered in Xuzhou, Jiangsu Province. As a national high-tech enterprise, the Group integrates research and development design, production and manufacturing, international trade, e-commerce, and logistics transportation. Driven by technological innovation, IMAQ continuously develops more than 40 categories of new and practical mechanical equipment, such as wheeled excavators, drilling machinery, new energy photovoltaic pile drivers, and more. Covering an area of over 35,000 square meters, the factory currently employs more than 100 people.
Since its establishment, IMAQ has established a complete market operation system and industrial value chain. Leveraging the innovative model of "Internet + traditional manufacturing," the company has achieved sustained and rapid development in the new industry of cross-border e-commerce. The Group places a strong emphasis on product innovation and quality, committing itself to intelligent modifications, such as the application of remotely controlled pile driving equipment, to ensure construction safety. Additionally, it continues to introduce new excavation equipment, enabling customers to achieve multi-functionality and increased profitability.
Our products have passed the CE and ISO9001 quality system certification and so on. We have export to more than 100 countries and regions, such as Algeria, Ghana, India, Iraq, Russia, Libya, Nigeria, Oman, Philippines, South Africa, Zambia, etc. We have been committed to the concept of high quality, top technology. We do our utmost to satisfy customers' needs, make our products win initiative in fierce market by developing the core technology via high quality perfect management and quality control system, as well as the first class after-sale service.We believe IMAQ brand will be your first choice under our effort.
Q1: Are you trading company or manufacturer?
A: We are manufacturer.
Q2: How long is your delivery time?
A: Generally it is 3-7 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q3: What is your payment method?
A: 30% of total price should be paid by T/T as down payment; 70% balance payment should be paid by T/T before delivery.
Q: How long do you need to produce the crushing production line?
A: For 300tph and lower capacity plant ,30-40 working days
){kind=link}